Resources and Technologies

Technological Innovation and Sustainable Aviation Fuels (SAF)

At present, there are two main (innovative) aviation technologies that are pursued: Hydrogen and battery-electric powered aircraft. Both have a significant potential to reduce air traffic related GHG emissions in the future, especially non-CO2 effects. However, both options require intensive further work of research and development before they can be introduced as mature and commercially viable aircraft technologies. From today’s perspective this will take more than a decade.

Moreover, they require the implementation of a separate fuel / energy supply infrastructure (e.g. liquid hydrogen) as well as the development for corresponding production and storage infrastructure to produce hydrogen or electrical energy from renewable energies on a large-scale.

Hydrogen Aircraft

The use of hydrogen in aircraft, especially if it is intended to exceed the deployment in auxiliary power units or on-board power supply, necessitate more advanced technological, infrastructural, and operational developments which go beyond today’s standard of technology. To successfully incorporate (liquid) hydrogen in a commercial aircraft, essential components such as fuel tanks and crucial parts of the propulsion system must be completely redesigned.

There are two main approaches being pursued for the propulsion of hydrogen aircraft: The use of hydrogen in modified gas turbines and in fuel cells. The incorporation in gas turbines potentially requires less developmental work compared to the use in fuel cells, possibly enabling a timely use of hydrogen in aviation. Nonetheless, the utilization of hydrogen in fuel cells could further reduce the overall GHG emissions. However, this requires a further development of fuel cell technology.

Furthermore, sustainable production and sufficient supply of hydrogen is necessary to reduce climate gas emissions from aviation. This specifically requires an abundant supply of renewable energy (e.g. wind and solar power). The path for the expansion of hydrogen is currently paved out on a political and regulatory level in Germany and Europe. In other words: The availability and supply of (sustainable) hydrogen will, particularly in the early stages of large-scale use, most likely be limited and the many areas in which this fuel is applicable, will face a competitive situation. It must therefore be ensured, that hydrogen is also available for aviation if a large-scale use is intended.

Battery Electric Aircraft

The present propulsion components and energy sources of battery-electric aircraft, i.e., the gas turbine and kerosene, are to be completely replaced by an electric motor with a battery as energy storage. The advantage of this propulsion and energy storage configuration is an overall high-performance efficiency of the propulsion components, which is twice as high as that of conventional aircraft engines.

Battery-electric aircraft, similarly to hydrogen aircraft, still face multiple technical challenges in aviation. Especially batteries with a sufficiently high energy density and proportionately low weight play a key role in achieving the use of fully electric aircraft. Today’s current batteries (still) have a considerably low energy density; compared to conventional (fossil) fuel this is lower by a factor of 25. It is, thereby extremely difficult to carry abundant energy on board to fuel the respective flight, henceforth strongly reducing the possible range at which the aircraft can be operated. The range of application of electric aircraft is, from today’s perspective, primarily limited to short-haul flights or to areas of application in the urban air

Furthermore, the use of battery-electric aircraft requires the appropriate airport infrastructure for charging or rapid replacement of batteries. This type of infrastructure, comparable to that of hydrogen, should at the very least be available at the central hubs in the respective route network of the individual airlines so that electric aircraft be used as efficiently and comprehensively as possible.

Depending on how the utilization of hydrogen aircraft evolves, the infrastructure for battery-electric aircraft would – in a transition period at the very least – coexist with hydrogen and the current kerosene infrastructure. Such a ternary fuel infrastructurewould substantially differentiate itself from today’s aviation fuel infrastructure, which is consistently accessible on a worldwide scale.

For this technology to reduce climate gas emissions, the energy – as with hydrogen – must be generated from renewable sources such as wind or solar power. The required supply of renewable electrical energy is potentially subject to strong competition, especially in market ramp-up phases, and may pose challenges in the further development of conversion plants (e.g. wind power plants).

Conclusion Technology Innovation

Technological innovations provide the opportunity to massively reduce climate gas emissions in aviation. This, however, requires years of intensive development work. Furthermore, it will take years to decades before these new technologies can sufficiently be fused with the current aircraft fleets, subsequently reducing the climate gases in a magnitude that is noticeable. Reason for this is the aircraft´s long technical utilization period and low modernization cycle of the fleets along with a continued use of the aircraft.

Therefore, options must be pursued parallel to the development and availability of these new technologies, which are (“immediately”) available in the near-term and that facilitate a notable reduction of GHG emissions within currently existing aircraft fleets.

Sustainable Aviation Fuels (SAF)

Sustainable aviation fuels, compared to innovative technologies, can be made available and be scaled up in the nearer future. They can be used as so-called “drop-in” fuels in existing aircraft and the existing fuel supply infrastructure. The achievable GHG reductions by SAF therefore neither depend on fleet modernization rates nor comparable factors. SAF are consequently necessary for a timely and significant reduction of GHG emissions in aviation. A large-scale SAF market ramp-up in the near future is only viable based on sustainable biogenic SAF, while electricity-based SAF are especially necessary in the long-term. It is crucial that only sustainable feedstocks are used for SAF production. In general, a distinction can be made between biogenic, electricity-based and hybrid SAFs.

Biogenic SAF

The term, biogenic or biomass based SAF (biokerosene), covers a broad scope of different SAF options that are produced from oil, fat, starch, or sugar containing biomass and/or lignocellulosic (woody and semi-woody) biomass. This includes for example plant oils, algae, specific components of energy plants, organic municipal- and industrial-waste, or agricultural and forestry residues. A position paper from aireg on the national biomass strategy of Germany is available here.

Power-to-Liquid (PtL) / Electricity-based SAF

The term electricity-based SAF or Power-to-Liquid (PtL) SAF defines sustainable aviation fuels, which are not produced based on biomass but solely based on electricity from renewable sources, water, and CO2. An overview of raw material and energy requirements can be found here.

Hybrid SAF

Hybrid SAF (also called PBtL SAF) origin from hybrid production processes or combined biomass and electricity-based processes. Other than pure electricity-based approaches, water, CO2, and electricity are not the only possible input materials. Besides electricity, a further carbon source (e.g. bio methane), which already contains a part of the energy of the final aviation fuel, is used for production.

The most relevant SAF conversion pathways

The origin of the feedstock used largely determines the sustainability of the fuel produced. For this reason, aireg focuses intensively on feedstock which substitute fossil sources in the short, medium and long term. Not only their quantitative availability is taken into account, but also the extent to which they meet generally accepted sustainability. In addition to raw materials, a wide range of conversion processes and technologies are also assessed from a techno-economic perspective. Life cycle greenhouse gas emissions, the availability of the technology as well as a cost estimate of the products play an essential role. The aireg roadmap provides an overview of various raw materials, conversion technologies and steps for the market ramp-up of sustainable aviation fuels.

Figure depicts the most relevant SAF conversion pathways

Scroll to Top